Cleaning And Checking The Machine; Cleaning The Scanner Glass; Cleaning The Print Head - Brother DCP-J100 User Manual

Cleaning and checking
the machine

Cleaning the scanner glass

a
Unplug the machine from the electrical
socket.
b
Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
1
NOTE
In addition to cleaning the scanner glass
with a non-flammable glass cleaner, run
your finger tip over the glass to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
34

Cleaning the print head

To maintain good print quality, the machine
A
will automatically clean the print head when
needed. You can start the cleaning process
manually if there is a print quality problem.
A
Clean the print head if you get a horizontal
line in the text or graphics, or blank text on
your printed pages. You can clean Black only;
Yellow, Cyan, and Magenta at once; or all
four colours at once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
3
damage and may void the print head's
warranty.
a
2
b
c
d
Press Menu.
Press a or b to choose 1.Ink.
Press OK.
Press a or b to choose 2.Cleaning.
Press OK.
Press a or b to choose Black, Colour
or All.
Press OK.
The machine cleans the print head.
When cleaning has finished, the
machine will go back to the Ready
mode.
A