Remote Control Code; Adjustable Feet - Eiki LC-WXL200A Owner's Manual

Part Names and Functions
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control
codes prevents interference from other remote controls when several projectors or video equipment next to each other are
operated at the same time. Change the remote control code for the projector first before changing that for the remote control.
See "Remote control" in the Setting Menu on page 58.
1
Press and hold the MENU and a number button (1–8) for
more than five seconds to switch between the codes.
2
To reset the remote control code, press and hold the MENU
and the number button 0 for more than five seconds.
Projection angle can be adjusted up to 4.0 degrees with the

adjustable feet.

Rotate the adjustable feet and tilt the projector to the proper height;
to raise the projector, rotate the both feet clockwise.
To lower the projector or to retract the adjustable feet, rotate the
both feet counterclockwise.
16

Remote Control Code

Adjustable Feet
Adjustable Feet
Press and hold the MENU and a number button
(1-8) that corresponds to the remote control code
for more than five seconds to switch between the
codes.
MENU button
Number buttons
(1-8)
ON/OFF
Switch