Configuring Wireless Network; Example Of Wireless Settings - D-Link DAP-1150 Quick Installation Manual

Wireless access point supporting router mode

Hide thumbs Also See for DAP-1150:

Table of Contents

DAP-1150

Configuring Wireless Network

By default, the wireless network of the access point is open (it requires no

password to access it). To avoid unauthorized access to your wireless local

area network, change the default settings of the access point.

1. Go to the Wi-Fi / Security settings page.

2. Select the WPA2-PSK value from the Network Authentication drop-

down list.

3. Enter a key (a password that will be used to access your wireless

network) in the Encryption Key PSK field. Use digits and Latin

characters.

4. Select the AES value from the WPA Encryption drop-down list.

5. Click the Change button.

If you perform initial configuration of the access point via Wi-Fi

connection, note that immediately after changing the wireless default

settings you will need to reconfigure the wireless connection using the

newly specified settings.

Quick Installation Guide

Table of Contents