Important Safety Instructions - Honeywell HD3U Quick Install Manual

4
Operate Your Camera
Camera Functions
Joystick (5 way) control
Center
position
- Press down on the joystick in the center position and hold
= ENTER
two seconds to access the MAIN MENU.
- Press down again on the center position to select ENTER
and to enter a screen or to select a menu option.
 ,  Move horizontally to and between menus and
options

Move vertically to and between menus and options
, 
".." indicates submenus
Local video out
connection
MENU
CAMERA SETUP ..
VIEWING ..
Select a menu, then
WDR PRESETS ..
press ENTER to enter DAY/NIGHT SETUP ..
VERSION INFO ..
the submenu.
RESTORE DEFAULTS <NO>
>
EXIT EXIT W/O SAVE.
To save your changes, select SAVE & EXIT, and then
ENTER. Your settings remain in effect when power is
turned off, then on again.
8
Set the Camera Image Properties
The VIEWING menu has the following controls:
VIEWING
• FLIP reverses the image horizontally on the
FLIP OFF
video monitor.
> ID DISPLAY <OFF>
• ID DISPLAY opens the CAMERA ID SETUP
SHARPNESS NORMAL
BRIGHTNESS 110 80 130
screen where you can add a CAMERA ID

RESOLUTION NORMAL
(title) of up to 8 characters. You can also
COLOR ADJ. 0 -8 8

PREVIOUS PAGE .
select the position of the CAMERA ID on the
video monitor.
• SHARPNESS and RESOLUTION affect the
sharpness of the image.
• BRIGHTNESS adjusts the brightness of the
image.
• COLOR adjusts the color saturation.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
5
Select the WDR Preset For Your Scene
CAMERA SETUP ..
VIEWING ..
WDR PRESETS .. INDOOR>
>
DAY/NIGHT SETUP ..
VERSION ..
RESTORE DEFAULTS
EXIT
The Wide Dynamic (WDR) presets and the scenes for which they are optimized.
WDR Preset
INDOOR
LOADING DOCK
GAMING
LICENSE PLATE
OUTDOOR
ATM
LOBBY
Move the joystick 
or 
to change the status.
9
Install the Enclosure Cover
To install the dome cover, align the dome cover with the camera base and push until
it securely snaps into place.
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug this apparatus during lightning storms or when unused for
long periods of time.
11. Refer all servicing to qualified personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
This product is CLASS 2 only.
The UL listing label is located on the back of the camera.
© 2010 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The
information in this publication is believed to be accurate in all respects. However, Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use
thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
WDR PRESETS
MENU
WDR PRESETS
INDOOR
LOADING DOCK
PRESETS .. <CUSTOM.>
>
FLUORESCENT OFF GAMING
PREVIOUS PAGE
LICENSE PLATE
OUTDOOR
ATM
SAVE & EXIT
LOBBY
Area of Interest WDR Exposure
Full scene Wide Highlights
Center scene Ultrawide Highlights
Full scene spot glare Medium Highlights
Full scene spot glare Medium Shadows
Full scene Ultrawide Highlights
Center scene Ultrawide Shadows
Center scene Wide Shadows
Camera base
Dome cover
6
Set the Day/Night Function
Note This setting is dependent on
MENU
the AGC setting.
CAMERA SETUP ..
VIEWING ..
On the DAY/NIGHT SETUP menu, select:
WDR PRESETS .. INDOOR>
• DAY/NIGHT SETUP, then select either:
DAY/NIGHT SETUP ..
>
VERSION ..
• AUTO (default) depending on the light
RESTORE DEFAULTS
level, the camera automatically switches
EXIT SAVE & EXIT
from color to black and white, OR
• OFF the camera stays in color mode
regardless of the light level, OR
• B/W the camera stays in black and white
mode regardless of the light level
• *CLR BURST (color burst), then select either:
• ON (default) = B/W with color burst, OR
• OFF = B/W without color burst
Note Certain video recorders require color carrier/burst to operate.
7
Set the AGC
The Automatic Gain Control is set by the chosen WDR preset. You can refine the
AGC setting in the AGC menu (MAIN MENU
This setting affects the day/night threshold. A higher AGC value results in the
camera switching from day to night mode at lower light levels. Adjust the level of
gain applied to the video signal in low light conditions.
Honeywell Security Group (Head Office) Honeywell Security Group Northern Europe
2700 Blankenbaker Pkwy, Suite 150 Ampèrestraat 41
Louisville, KY 40299, USA 1446 TR Purmerend, The Netherlands
www.honeywellvideo.com www.honeywell.com/security/nl
 +1.800.796.2288  +31.299.410.200
Honeywell Security Group Europe/South Africa Honeywell Security Group Deutschland
Aston Fields Road, Whitehouse Industrial Estate Johannes-Mauthe-Straße 14
Runcorn, Cheshire, WA7 3DL, UK D-72458 Albstadt, Germany
www.honeywell.com/security/uk www.honeywell.com/security/de
 +44.01928.754028  +49.74 31.8 01.0
Honeywell Security Group Caribbean/Latin America
9315 NW 112th Ave. Honeywell Security Group France
Miami, FL 33178, USA Immeuble Lavoisier
www.honeywellvideo.com Parc de Haute Technologie
 +1.305.805.8188 3-7 rue Georges Besse
92160 Antony, France
Honeywell Security Group Pacific www.honeywell.com/security/fr
Level 3, 2 Richardson Place  +33.(0).1.40.96.20.50
North Ryde, NSW 2113, Australia
www.honeywellsecurity.com.au
 +61.2.9353.7000 Honeywell Security Group Italia SpA
Via della Resistenza 53/59
Honeywell Security Group Asia 20090 Buccinasco
35F Tower A, City Center, 100 Zun Yi Road Milan, Italy
Shanghai 200051, China www.honeywell.com/security/it
www.asia.security.honeywell.com  +39.02.4888.051
 +86 21.5257.4568
Honeywell Security Group Middle East/N. Africa Honeywell Security Group España
Post Office Box 18530 Mijancas 1. 3a planta
LOB Building 08, Office 199 P.Ind. Las Mercedes
Jebel Ali, Dubai, United Arab Emirates 28022 Madrid, Spain
www.honeywell.com/security/me www.honeywell.com/security/es
 +971.04.881.5506  +34.902.667.800
+1.800.796.CCTV (North America only)
Document 800-05023 – Rev D – 02/10
➤ ➤
CAMERA SETUP AGC).
www.honeywellvideo.com
HVSsupport@honeywell.com