DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
Page 3
The power circuit will restore itself automatically once the excessive current or voltage conditions are rectified. HDMI® 1 x 8 Splitter over 2 UTP with IR Part # 280718 • Allows 1 HDMI Source to be Connected to 8 • Unique Circuit Design Allows for Protection...
HDMI® 1 x 4 Splitter over 2 UTP with IR Part # 280714 • Allows 1 HDMI Source to be Connected to 4 • Unique Circuit Design Allows for Protection HDMI Displays Devices over Dual Cat5e/Cat6 against High Voltage and Peak Currents Cables • Tested for Compatibility with all leading HD • Transmission Range: Extends 1080p...
• Product Manual • Two Mounting Ears for Part #280718 CONNECT AND OPERATE Connect the signal source such as Blu-Ray Player, Play Station 3, audio/video receiver, cable or satellite receivers and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI splitter input.
CONNECTION DIAGRAM Super IR Control System Over UTP Cable Blu-Ray HDTV Player Sender Receiver HDMI HDMI 2 UTP Cables IR TX Pigtail IR Remote (1 per display) RX Pigtail www.vanco1.com...
TROUBLE-SHOOTING 1. Best results are usually achieved when the source and display resolutions are the same. If resolutions differ, the splitters will try to adjust the signal to match the resolution of the HD TV with the lowest resolution. This will result in a picture with a lower resolution on the other HD TV sets. 2.
Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco. This warranty does not apply to those products which have been damaged due to accident, unauthorized alterations, improper repair, modifications, inadequate maintenance and care, or use in any manner for which the product was not originally intended.
TECHNICAL SUPPORT In case of problems, please contact Vanco Technical Support by e-mail at support@Vanco1.com or call 1-800- 626-6445 between the hours of 8am and 5pm central US time zone on Monday through Friday. When calling, please have the Model Number, Serial Number (affixed to the bottom of the unit) and Invoice available for reference during the call.
Need help?
Do you have a question about the 280718 and is the answer not in the manual?
Questions and answers