This will open the user authentication window, as seen below.
Enter the login User name and Password and click OK to proceed. This will open the Web-based User Interface. The
switch management features available in the Web-based manager are explained below.
NOTE: To be able to connect to the Web User Interface, a user account must be created first using
the Command Line Interface. By default, there are no user accounts configured on this switch. See
the DXS-3600 Series CLI Reference Guide for more information about creating user accounts by
means of the Command Line Interface.
Areas of the User Interface
After a successful connection to the Web User Interface has been made, the following page should be displayed.
DXS-3600 Series 10GbE Layer 2/3 Switch Web UI Reference Guide
Figure 2-2 Enter Network Password window
3