D-Link DXS-3600 Series Reference Manual page 29

Category Log Description
802.1X Event description: 802.1X Authentication failure.
Log Message: 802.1X Authentication failure [for <reason> ] from
(Username: <username>, <interface-id>, MAC: <macaddr> )
Parameters description:
reason: The reason for the failed authentication.
username: The user that is being authenticated..
interface-id: The interface name.
macaddr: The MAC address of thr authenticated device.
Event description: 802.1X Authentication successful.
Log Message: 802.1X Authentication successful from (Username:
<username>, <interface-id>, MAC: <macaddr>)
Parameters description:
username: The user that is being authenticated.
interface-id: The interface name.
macaddr: The MAC address of the authenticated device.
RADIUS Event description: The VID assigned from the RADIUS server after the
RADIUS client was authenticated by the RADIUS server successfully. This
VID will be assigned to the port and this port will be the VLAN untagged port
member.
Log Message: RADIUS server <ipaddr> assigned VID :<vlanID> to port
<interface-id> (account :<username> )
Parameters description:
ipaddr: The IP address of the RADIUS server.
vlanID: The VID of the RADIUS assigned VLAN.
interface-id: The interface name.
Username: The user that is being authenticated.
Event description: The ingress bandwidth assigned from the RADIUS
server after the RADIUS client was authenticated by the RADIUS server
successfully. This ingress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned ingress bandwith
:<ingressBandwidth> to port <interface-id> (account : <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
ingressBandwidth: The ingress bandwidth of the RADIUS assignment.
interface-id: The interface name.
Username: The user that is being authenticated.
Event description: The egress bandwidth assigned from the RADIUS server
after the RADIUS client was successfully authenticated by the RADIUS
server. This egress bandwidth will be assigned to the port.
Log Message: RADIUS server <ipaddr> assigned egress bandwith
:<egressBandwidth> to port <interface-id> (account: <username>)
Parameters description:
ipaddr: The IP address of the RADIUS server.
egressBandwidth: The egress bandwidth of the RADIUS assignment.
interface-id: The interface name.
Username: The user that is being authenticated.
DXS-3600 Series 10GbE Layer 2/3 Switch Web UI Reference Guide
24
Severity Note
Warning
Informational
Informational
Informational
Informational