Canon Vixia HFR20 Quick Manual page 92

To record video
g
3 Press
g
Press
To take photos
j
3 Press
If the subject is not in focus, h will flash in yellow. Adjust the
camcorder's position and press j halfway again. Once the focus
is automatically adjusted, h will turn green and one or more AF frames
will appear.
j
4 Press
The ACCESS indicator will flash as the photo is being recorded.
When you have finished recording
1 Make sure that the ACCESS indicator is off.
2 Turn off the camcorder.
3 Close the LCD panel.
About the Smart AUTO mode
• Only the following functions are available in this mode.
- Zoom (0 47).
- Quick Start (0 49).
- Video snapshot (0 68).
- Image stabilization modes (0 64).
- Face detection (0 66) to get beautiful shots of people every time,
tracking the subject even if the person moves.
- Touch & Track (0 67) to track other moving subjects, keeping
them in focus and using the best settings to record them.
- Decorating scenes (0 97).
Š
44
Smart AUTO Mode
to begin recording.
again to pause the recording.
halfway.
fully.