Opening Settings - Buffalo AirStation WZR-900DHP User Manual

7
Launch a web browser. If the home screen is displayed, setup is complete.
If username and password fields are displayed, enter "admin" for the username and "password" for the password,
then click Log In. Step through the wizard to complete setup.
You've completed the initial setup of your AirStation.

Opening Settings

To configure the AirStation, log in to Settings as shown below.
1
Launch a web browser.
2
Enter the AirStation's LAN-side IP address in the address field and press the enter key.
Notes:
• The AirStation's default LAN-side IP address depends on the mode.
• In router mode: 192.168.11.1
• In access point mode: 192.168.11.100
• In wireless bridge mode: 192.168.11.100
• If you changed the IP address of the AirStation, then use the new IP address.
3
Enter "admin" for the username and "password" for the password, then click Log In.
Note: If you forget your password, hold down the reset button to initialize all settings. Note that all other settings
will also revert to their default values.
15