Windows Vista - Buffalo AirStation WZR-900DHP User Manual

5
If the "User Account Control" screen opens, click Yes or Continue.
6
Select "Internet Protocol Version 4 (TCP/IPv4)" then click Properties.
7
To have DHCP set your IP address settings automatically, check "Obtain an IP address automatically" and "Obtain
DNS server address automatically".
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: leave blank
8
Click OK.

Windows Vista

To configure TCP/IP in Windows Vista, follow the procedure below.
1
Open Control Panel.
2
Click Network and Sharing Center.
3
Click Manage network connections on the left side menu.
4
Right-click the network adapter, then click Properties.
5
If the "User Account Control" screen opens, click Yes or Continue.
6
Select "Internet Protocol Version 4 (TCP/IPv4)" then click Properties.
7
To have DHCP set your IP address settings automatically, check "Obtain an IP address automatically" and "Obtain
DNS server address automatically".
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: leave blank
8
Click OK.
117