Buffalo AirStation WZR-900DHP User Manual page 106

Step 4: Configure Roaming
1
Run AirStation Configuration Tool from the PC and scan for all devices.
2
Select the wireless bridge and select "Change IP Address".
3
Select "Get IP Address from DHCP" and click "Next". You may be prompted for the wireless bridge's password as it is
being configured.
4
After the wireless bridge's IP address is configured, open any web browser and log in to Settings.
5
Navigate to Advanced Settings - Wireless - Wireless Bridge.
6
Check "Use SSID and security settings from master" and click Apply.
106