Table of Contents
Advertisement
TCP/IP Settings
Windows 8
To configure TCP/IP in Windows 8, follow the procedure below.
1
Open [Control Panel].
2
Click [Network and Internet].
3
Click [Network and Sharing Center].
4
Click [Change adapter settings] on the left side menu.
5
Right-click on the network adapter, then click [Properties].
6
If the User Account Control screen opens, click [Yes] or [Continue].
7
Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
8
To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain
DNS server address automatically].
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
9
Click [OK].
18
Advertisement
Table of Contents
