CYBEX Total Access Leg Press Owner's And Service Manual page 29

3. Some machines use cables in addition to belts. Inspect all cables for wear or damage and proper
tension. When inspecting cables, run your fingers on the cable, paying particular
attention to bends in the cable and attachment points.
Replace all worn cables immediately. The following conditions may indicate a worn
cable:
• A tear or crack in the cable sheath that exposes the cable. See Figure 1
Figure 1
• A kink in the cable. See Figure 2.
Figure 2
• A curled sheath. See Figure 3.
Figure 3
• "Necking", a stretched cable sheath. See Figure 4.
Figure 4
Cybex Total Access Owner's Manual
Maintenance
Page 5-5