CYBEX Eagle Owner's And Service Manual
  1. Manuals
  2. Brands
  3. CYBEX Manuals
  4. Home Gym
  5. Eagle
  6. Owner's and service manual

CYBEX Eagle Owner's And Service Manual

Leg press
Hide thumbs Also See for Eagle:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
®
Cybex Eagle
Leg Press
Owner's and Service Manual
Strength Systems
Part Number 11040-999 J
www.cybexinternational.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Eagle and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CYBEX Eagle

Summary of Contents for CYBEX Eagle

  • Page 1 ® Cybex Eagle Leg Press Owner’s and Service Manual Strength Systems Part Number 11040-999 J www.cybexinternational.com...
  • Page 3 ® DISCLAIMER: Cybex International, Inc., makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes.

  • Page 5: Table Of Contents

    Table of Contents 1 Safety Safety......1-1 Warning/Caution Decals ... 1-2 Regular Maintenance Activities .

  • Page 7: Safety

    Cybex Eagle 11040 Leg Press Owner’s Manual 1 - Safety Safety Read the Owner’s Manual carefully before assembling, servicing or using the equipment. It is the responsibility of the facility owner and/or owner of the equipment to instruct users on proper operation of the equipment and review all labels.
  • Page 8 Cybex Eagle 11040 Leg Press Owner’s Manual • Make sure that each machine is set up and operated on a solid level surface. Do not install equipment on an uneven surface. • Make sure that all users are properly trained on how to use the equipment.

  • Page 9: Warning/Caution Decals

    Cybex Eagle 11040 Leg Press Owner’s Manual 3. Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when anchoring the equipment to the fl oor. 4. Due to the wide variation of fl ooring on which machines may be anchored or installed, verify anchoring method and anchoring fasteners with a qualifi...
  • Page 10 Cybex Eagle 11040 Leg Press Owner’s Manual CAUTION Personal injury may occur. Keep away from moving parts to avoid injury. 4000Y316-4 CAUTION Keep away from moving parts. Failure to do so could result in personal injury. 8500-026-4 4605-381-4 A CAUTION Back cushion may drop when knob is pulled.
  • Page 11 Cybex Eagle 11040 Leg Press Owner’s Manual Leg Press - 11040 DESCRIPTION PART NO. Warning Label ....4605-381-4 Caution Decal ....4000Y316-4 Caution Decal ....8500-025-4 Caution Decal ....8500-026-4 Caution Decal....8500-028-4 Safety Page 1-5...

  • Page 12: Regular Maintenance Activities

    Cybex Eagle 11040 Leg Press Owner’s Manual Regular Maintenance Activities Preventative maintenance activities must be performed to maintain normal operation of your equipment. Keeping a log sheet of all maintenance actions will assist you in staying current with all preventative maintenance activities.

  • Page 13: Exercises

    fi tness and exercise. For Commercial use. Instructions Read and understand all instructions and warnings prior to using this machine. See Chapter 1, Safety in the Eagle Owner’s Manual or consult with fl oor staff. Quadriceps, Gluteus Maximus Hamstings FINISH START NOTE: Motion Developed: Hip Extension, Knee Extension NOTE: All adjustment points on the machine have yellow handles or knobs.
  • Page 14 Cybex Eagle 11040 Leg Press Owner’s Manual Set Up 1. Adjust back to desired angle. 2. Adjust foot plate to desired start position of about 90 degrees at the knee. 3. Position feet on foot plate shoulder width apart and toes pointed slightly outward.

  • Page 15: Customer Service

    Cybex Eagle 11040 Leg Press Owner’s Manual 3 - Customer Service Contacting Service Hours of phone service are Monday through Friday from 8:30 to 6:00 p.m. Eastern Standard Time. For Cybex customers living in the USA, contact Cybex Customer Service at 888-462-9239.

  • Page 16: Damaged Parts

    Cybex Eagle 11040 Leg Press Owner’s Manual 1. Call the Customer Service Hot Line listed above for the return of any item that is defective. 2. Provide the technician with a detailed description of the problem you are having or the defect in the item you wish to return.

  • Page 17: Assembly

    Verify that you received the correct color machine that you ordered. Verify you received weight plates and weight plate decals. Verify you received the Cybex Eagle Leg Press Owner’s Manual. Verify you received the warranty sheet. 3. Move to desired location.
  • Page 18 Cybex Eagle 11040 Leg Press Owner’s Manual Remove the fi ve Phillips screws securing the shield near the cam and remove shield. See Figure 1A. Phil Hex Washer (5) Rotate cam and disconnect weight stack belt from cam (by loosening the two set screws on the belt clamp with a 7/32”...
  • Page 19 Cybex Eagle 11040 Leg Press Owner’s Manual Remove the three Phillips head screws securing the top (back) shroud and carefully remove the shroud. See Figure 5. Loosen bottom two screws shown in Figure 6. Phillips Head NOTE: Do not remove the bottom two screws.
  • Page 20 Cybex Eagle 11040 Leg Press Owner’s Manual Slide top weight onto guide rods. Insert and Set Screws (not shown) are on this side. Place lower snap ring and wave washer onto guide Belt rod (about 3” from the top end of guide rod).
  • Page 21 See the Cybex Eagle Owner’s Manual for inspection and Back maintenance activities. If you do not have a Cybex Eagle Owner’s Manual or if you have any questions or concerns, call Cybex Customer Relations Figure 17 at 888-462-9239.
  • Page 22 Cybex Eagle 11040 Leg Press Owner’s Manual This page intentionally left blank. Assembly Page 4-6...

  • Page 23: Maintenance

    Cybex Eagle 11040 Leg Press Owner’s Manual Chapter 5 - Maintenance All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all Cybex Strength Systems equipment.
  • Page 24 Cybex Eagle 11040 Leg Press Owner’s Manual More Difficult Stains • Dampen a soft white cloth with a solution of 10% household bleach (sodium hypochlorite), 90% water. Rub gently. Rinse with a water dampened cloth to remove bleach concentration. • The same procedure can be used with full strength household bleach, if necessary.
  • Page 25 Cybex Eagle 11040 Leg Press Owner’s Manual 4. Guidelines for cleaning front panel: • Use clean soft cloths or sponges for application of cleaners and again for washing and rinsing. • Follow up the application with warm water rinse. •...

  • Page 26: Weekly Procedures

    Cybex Eagle 11040 Leg Press Owner’s Manual Weekly Procedures 1. Check all nuts and bolts for looseness. Tighten as required. 2. Inspect all belts (entire length) for any non-uniformity and wear. Immediately replace belt if any of the following conditions are present:...
  • Page 27 Cybex Eagle 11040 Leg Press Owner’s Manual 3. Some machines use cables in addition to belts. Inspect all cables for wear or damage and proper tension. When inspecting cables, run your fingers on the cable, paying particular attention to bends in the cable and attachment points.

  • Page 28: Yearly Procedures

    Cybex Eagle 11040 Leg Press Owner’s Manual 4. Inspect bars and handles for wear, paying particular attention to tab area connecting points. Replace all worn handles immediately. 5. Inspect snap links for proper latching (indicates wear). Replace all worn snap links immediately.

  • Page 29: Environment

    Cybex Eagle 11040 Leg Press Owner’s Manual Environment Static Electricity - Depending upon where you live, you may experience dry air, causing a common experience of static electricity. This may be especially true in the winter time. You may notice a static build-up just by walking across a carpet and then touching a metal object.
  • Page 30 Cybex Eagle 11040 Leg Press Owner’s Manual Maintenance Page 5-8...

  • Page 31: Service

    Cybex Eagle 11040 Leg Press Owner’s Manual 6 - Service Please refer to the next several pages for parts lists, exploded-view diagrams. NOTE: All inspections and repairs must be performed by trained service personnel only. Cybex will void warranty if non-Cybex replacement parts are used.
  • Page 32 Cybex Eagle 11040 Leg Press Owner’s Manual This page intentionally left blank Service Page 6-2...

  • Page 33: Exploded-View Diagram

    Cybex Eagle 11040 Leg Press Owner’s Manual LEG PRESS PRODUCT NO. 11040 NOTE: See exploded-view diagram for location of L (serial number decal), M (See top weight assembly detail ), N (68A and 68B) and P (#46) and R (Increment Weight Decal).
  • Page 34 Cybex Eagle Leg Press Owner’s Manual ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 11040-202 FOOT PLATE FB030232 BEARING, RADIAL 17 mm EXT. RACE 11040-203 LINKAGE FB110200 BRG, LINEAR 1.50 11040-205 SEAT FB130207 BRG FLG 17mm X 19mm X 25mm...
  • Page 35 Cybex Eagle Leg Press Owner’s Manual Service Page 6-5...
  • Page 36 Cybex Eagle 11040 Leg Press Owner’s Manual SHROUD AND GUIDE ROD ASSEMBLY DETAIL Service Page 6-6...
  • Page 37 Cybex Eagle 11040 Leg Press Owner’s Manual SEAT AND CARRIAGE ASSEMBLY DETAIL Service Page 6-7...
  • Page 38 Cybex Eagle 11040 Leg Press Owner’s Manual TOP WEIGHT ASSEMBLY DETAIL ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 11040-366 Top Weight Assembly, Molded HT582510 Tap SC NO 10 x .375 PN HD Phil 11040-367 Hub, Molded 11040-409 Molded Bumper Pad...
  • Page 39 Cybex Eagle 11040 Leg Press Owner’s Manual BELT ROUTING ASSEMBLY DETAIL Service Page 6-9...
  • Page 40 Cybex Eagle 11040 Leg Press Owner’s Manual This page intentionally left blank Service Page 6-10...
  • Page 42 10 Trotter Drive Medway, MA 02053 • 508-533-4300 • FAX 508-533-5183 www.cybexinternational.com • techhelp@cybexintl.com...

Table of Contents