Turning The Power On And Off; Switching The Lcd Monitor To Viewfinder; Opening The Flash - BenQ GH800 User Manual

20 Preparing the camera for use

Turning the Power On and Off

Before turning on the camera, be sure to remove the lens cover. Otherwise, the lens
will not be extended and the camera will beep for a few times.
There are two ways to turn on the camera:
• Press the
Power (ON/OFF)
The camera is turned on in
• Press and hold
The camera is turned on in

Switching the LCD Monitor to Viewfinder

There are two ways to view the preview display: LCD monitor or electronic
viewfinder. By default, the camera uses the LCD monitor to view the preview
display.
To switch to the viewfinder:
When using the LCD monitor, press the
view to electronic viewfinder. Then use the
the focus of the viewfinder.

Opening the Flash

You need to manually open the flash before switching the flash mode.
To open the flash:
Press the button to open it.
Flash
Do not use your hands to forcibly lift open the flash.
To close the flash:
Push down the flash to close it.
When the flash is closed, flash mode is automatically set to flash off.
button.
Record
.
Playback
mode.
mode, and the lens is not extended.
button to switch the display
EVF/LCD
Dioptric Correction
knob to adjust