Additional Features - HP EliteDesk 800 G1 Series Quickspecs

QuickSpecs
Technical Specifications – Miscellaneous Features

Additional Features

Towerable Orientation
Drive Lock
Drive Protection System
SMART Technology (Self-Monitoring,
Analysis and Reporting Technology)
SMART I - Drive Failure Prediction
SMART II - Off-Line Data Collection
SMART III - Off-Line Read Scanning with
Defect Reallocation
SMART IV - End-to-End CRC for hard drives
Product can be oriented as either a desktop or a tower
Implementation of the industry standard ATA Security feature set. When enabled, it
prevents software access to user data on the drive until one or two user-defined
passwords are provided.
DPS Access through F10 Setup during Boot
A diagnostic hard drive self test. It scans critical physical components and every sector of
the hard drive for physical faults and then reports any faults to the user
Running independently of the operating system, it can be accessed through a Windows-
based diagnostics utility or through the computer's setup procedure. It produces an
evaluation on whether the hard drive is the source of the problem and needs to be
replaced
The system expands on the Self-Monitoring, Analysis, and Reporting Technology
(SMART), a continuously running systems diagnostic that alerts the user to certain types
of failures
Allows hard drives to monitor their own health and to raise flags if imminent failures were
predicted
Predicts failures before they occur. Tracks fault prediction and failure indication
parameters such as re-allocated sector count, spin retry count, calibration retry count
By avoiding actual hard drive failures, SMART hard drives act as "insurance" against
unplanned user downtime and potential data loss from hard drive failure
IOEDC: I/O Error Detection Circuitry
Detects errors in Read/Write buffers on HDD cache RAM
Interface in F10 setup provides confirmation of SMART IV support.
DA - 14653 North America — Version 5 — July 18, 2013
HP EliteDesk 800 G1 Series Business Desktop
Description
Page 58