End Of Cleaning - CDA Oven Manual To Installation

EN 6 / CARING FOR AND CLEANING YOUR APPLIANCE
STARTING CLEANING
• •
To take advantage of the volume of heat already
built up in the oven and thus save energy:
Start a pyrolysis cycle after a cooking pro-
gramme.
Remove the accessories from the oven and
clean any major spill residue.
Ensure that the programmer displays the time
of day and that it is not flashing (fig.1).
Simply position your cooking selector on the
"Pyrolysis" position or on the
sis" (fig.1).
The oven is unavailable for 2.5 hours (two hours
of pyrolysis and 30 minutes of cooling) during
"Pyrolysis" or for two hours (1.5 hours of pyrol-
ysis and 30 minutes of cooling) during "ECO Py-
rolysis" (this duration is not modifiable).
This time includes the cooling time until the
door can be unlocked.

END OF CLEANING

• •
Pyrolysis stops automatically; it is then possible
to open the door.
At the end of the pyrolysis cycle, the display indi-
cates 0:00.
Return the function selector to the 0 position.
(fig.3).
When the oven is cool, use a damp cloth to re-
move the white ashes. The oven is clean and
once again ready for the cooking application of
your choice.
Warning
The door effectively locks a few minutes after the start of the cycle.
Pyrolysis stops automatically. When the temperature reaches approximately 275°C, it is
then possible to open the door.
Warning
Do not hang a towel or cloth on the oven handle.
"ECO Pyroly-
22
fig.1
fig.2
fig.3