Channel Number
MAC Address 1
Wireless Module
Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you
have clicked "Apply", you will see the following message:
Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
Select a channel from the dropdown menu. Both
access points must use the same channel (1 to 13).
Input the MAC address of the wireless access point
with which you wish to connect.
Select "Enable" to turn on the 2.4GHz wireless
signal and select "Disable" to turn it off.
55