Computer Input Source Selection - Eiki LC-XL100 Owner's Manual

Input Selection
Menu Operation
1
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select Input and then press the
Point ► or the SELECT button.
2
Use the Point ▲▼ buttons to select the desired input and
then press the Point ► button to access the submenu items.

Use the Point ▲▼ buttons to select the desired source and
then press the SELECT button.
WHEN SELECTING INPUT 1 (COMPUTER INPUT
TERMINALS )
RGB(PC analog)
When your computer is connected to the INPUT 1 (ANALOG)
terminal, select RGB (PC analog).
RGB(PC digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB(PC digital).

Note:
• Input source changes if the INPUT 1 button on the remote control is
pressed.
• HDCP (High-bandwidth Digital Content Protection) is a system for
protecting digital entertainment content which is delivered by DVI
(Digital Visual Interface) from being copied. The specification of HDCP
is decided and controlled by Digital Content Protection, LLC. Should
the specification be changed, this projector may not display the digital
content protected by HDCP.
WHEN SELECTING INPUT 2 (5 BNC INPUT jACKS )
When connecting the computer output [5 BNC Type (Green, Blue,
Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R,
H/HV, and V jacks:
RGB
When your computer is connected to the INPUT 2 (5 BNC
INPUT JACKS) terminal, select RGB.
4
Computer Input Source Selection
INPUT MENU
Input 1
Input 2
Input 3
System
Input 1
Input 2
Input 3
System
INPUT 1 MENU
Input 1
RGB(PC analog)
RGB(Scart)
RGB(PC digital)
RGB(AV HDCP)
INPUT 2 MENU
Y,Pb/Cb,Pr/Cr
RGB(PC analog)
RGB
Video
Auto
RGB(PC analog)
RGB
Video
SVGA 1