Connecting To Video Equipment (Video, S-Video) - Eiki LC-XL100 Owner's Manual

Installation
Cables used for connection
• Video cable (RCA x 1 or RCA x 3)
• BNC cable (BNC x 1 or BNC x 3)
• S-video cable

• Scart-VGA cable

• DVI-Digital cable

Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Composite
Video
BNC
cable
Video
Y - Pb/Cb - Pr/Cr
20
Connecting to Video Equipment (Video, S-video)
(  = Cables not supplied with this projector.)
Analog Out Signal Table


D-sub15
Input 1
DVI-D
Input 2 5 BNC
RCA
Input 3 S-video
Video
Network
Component
Video Output
Component Composite
(Y, Pb/Cb, Cr/Pr)
Video Output Video
RCA
cable
Video
Y - Pb/Cb - Pr/Cr
Input Terminal Monitor Out
RGB (PC analog) YES
RGB (SCART) NO
RGB (PC digital) NO
RGB (AV HDCP) NO
RGB YES
Video YES
Y, Pb/Cb, Pr/Cr YES
Y, Pb/Cb, Pr/Cr YES
S-video NO
Video YES
NO
S-video
Output
Refer to the
Analog Out
Signal Table
(above).
S-video
cable
ANALOG OUT S-VIDEO
Cable
 A cable with one
end D-sub 15 and
the other end (Black
box) compatible with
each equipment is

necessary.



Digital Output
(HDCP
RGB Scart
compatible)
21-pin Output
Scart-VGA
cable
ANALOG IN DIGITAL IN
DVI-Digital
cable