2‐2 Setting client computers to obtain IP addresses automatically
After the network connection is established, the next step you should do is setup the
router with proper network parameters, so it can work properly in your network
environment.
Before you can connect to the router and start configuration procedures, your
computer must be able to get an IP address automatically (use dynamic IP address). If it's
set to use static IP address, or you're unsure, please follow the following instructions to
configure your computer to use dynamic IP address:
If the operating system of your computer is....
Windows 95/98/Me ‐ please go to section 2‐2‐1
Windows 2000
Windows XP
Windows Vista
‐ please go to section 2‐2‐2
‐ please go to section 2‐2‐3
‐ please go to section 2‐2‐4