Table of Contents
Advertisement
Local IP Address
Local Port Range
Remote IP Address
Remote Port Range
Traffic Type
Protocol
Add
Reset
Edit
Delete Selected
guaranteed speed for this rule), or Max (
Set the IP address range that will be affected by
this QoS rule. If only one IP address is involved,
input the IP address in left field only.
Set the port range that will activate this QoS
rule. If only one port is involved, input a single
number here (1 to 65535); if multiple ports are
involved, input starting / ending port number in
x‐y format (like 10‐20).
Set remote IP addresses that will trigger this
QoS rule. If only one IP address is involved, input
the IP address in left field only.
Set the port range that will activate this QoS
rule. If only one port is involved, input a single
number here (1 to 65535); if multiple ports are
involved, input starting / ending port number in
x‐y format (like 10‐20).
If you're creating a QoS rule for a specific type
of traffic, you can select it from this menu and
you don't have to input port range above.
Select the protocol type here (TCP or UDP).
Click 'add' button to add a new QoS rule
(detailed instructions will be given below).
If you want to erase all values you just entered.
Click 'Reset'
If you want to modify the content of a specific
rule, please check the 'select' box of the rule you
want to edit, then click 'Edit' button. Only one
rule should be selected a time!
You can delete selected rules by clicking this
Advertisement
Table of Contents
