Page 1
How to Backup/Restore Settings in the Router Introduction Configuration Steps 1. Power on the router, and connect the router LAN port and the computer using the cable. 2. Open the web browser, type “192.168.2.1” on the address bar, and press enter. 3.
Page 2
4. Click “ Administrator ”, click “ Backup/Restore ”, and you are able to backup and restore settings here. Click “ Save “ at “Backup Settings”, and then click “Save” or “ Save as “ at the bottom of the page. The settings file is saved successfully.
Page 3
5. If you would like to restore the settings. Click “ Administrator “, click “ Backup/Restore ”, click “ Browse “ to select settings file, and then click “ Upload “. It takes about 1 minute, and the settings is restored successfully.