MAC address 1
Set Security
After you finish with setting, please click „Apply‟, and the following
message will be displayed:
When you see this message, the settings you made is successfully saved,
you can click „Continue‟ button to back to previous page and continue on
other setting items, or click „Apply‟ button to restart the wireless access
point and the changes will take effect after about 30 seconds.
The channel number must be same with another
wireless access point you wish to connect
Please input the MAC address of the wireless
access point you wish to connect
Click this button to select an encryption mode for
this wireless link, a new popup window will
appear. Please refer to Section 2-7 for detailed
descriptions.
31