You can click „Continue‟ button to back to previous page and continue on
other setting items, or click „Apply‟ button to restart the wireless access
point and the changes will take effect after about 30 seconds.
2-4-6 Universal Repeater
In this mode, the access point can act as a wireless repeater; it can be
Station and AP at the same time. It can use Station function to connect to
a Root AP and use AP function to service all wireless stations within its
coverage.
NOTE: For Repeater Mode, this access point will demodulate the
received signal, checking if this signal is noise for the operating
network then have the signal modulated and amplified again. The
output power of this mode is the same as that of WDS and normal
AP mode.
Here are descriptions of every setup item:
Band
Please select the wireless band you wish to use. By
selecting different band setting, you‟ll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
36