Edimax EW-7228APn User Manual page 34

Main ESSID
Site Survey
After you finish with setting, please click „Apply‟, and the following
message will be displayed:
When you see this message, the settings you made is successfully save.
You can click „Continue‟ button to back to previous page and continue on
other setting items, or click „Apply‟ button to restart the wireless access
point and the changes will take effect after about 30 seconds.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this access point,
select 2.4GHz (B+G+N).
Please input the ESSID (the name used to identify
this wireless access point) here. You can input up
to 32 alphanumerical characters. PLEASE NOTE
THAT ESSID IS CASE SENSITIVE.
When you use this access point as a wireless
station for Ethernet network device to have
wireless capability, you have to associate it with a
working access point. Click „Select Site Survey‟
button, then a "Wireless Site Survey Table" will
pop up. It will list all available access points near
by. You can select one access point in the table and
it will join wireless LAN through this access point.
Please go to Section 2-4-2-1 for more information
about the „Wireless Site Survey Table‟.
27