Other edit operations
The "Micro Edit" page allows you to select several func-
tions.
You can select several consecutive events and edit
them in one go: select the first event of a series, press
and hold the [ENTER/SELECT] button and rotate the
[CURSOR÷VALUE] dial.
1.
Select the event you want to edit.
2.
Press the [MENU] button (its indicator
flashes).
The display changes to:
The top line shows the event type that can be edited
("CC00 Bank MSB" in our example) and its location
("001:01:000"). You cannot change the event type on
this page.
If you selected several events (see above), the display
looks as follows:
3.
Use the [CURSOR÷VALUE] dial to select the
desired edit function, then press the
[ENTER/SELECT] button.
Backing Keyboard BK-5 OR
Editing individual rhythm events (Micro Edit)
Create Event
Select this function to add a new event to the
selected track.
If the position for which you create a new event
already contains other events, the new event is added
at the end of that group.
Parameter
Setting
Event
Note, Control
Change, Pro-
gram Change,
Pitch Bend,
Alteration
Mode
To Bar,
See page 92.
To Beat,
To CPT
The selected event is inserted with a default value:
Note: Note Number: 60 C4
On Velocity: 100
Gate Time: 60
Program Change: CC00 Bank Select MSB, value "0"
CC32 Bank Select LSB, value "4"
Program Change Number "1"
(The bank select messages are added
automatically: you don't have to
worry about that.)
Pitch Bend: "0"
Alteration Mode: Nearest
Limit Low: Std
Limit High: Std
Obviously, you will then need to change the default
settings depending on the result you want to
achieve.
Press the [WRITE] button to confirm your settings
and add the new event. The BK-5 OR returns to the
"Micro Edit" page.
Erase Event
This function allows you to remove one or several
events without changing the positions of the
remaining events.
1.
Use the [CURSOR÷VALUE] dial to select the
event you want to delete.
The selected event is displayed at the center of the
display page.
r
Explanation
Allows you to specify
the event type you
want to add.
Specifies the position
where your new event
will be inserted.
105