Other Performance List Functions; If You Select 'Rename - Roland BK-5OR Owner's Manual

Backing keyboard
Hide thumbs Also See for BK-5OR:
Table of Contents

Advertisement

Backing Keyboard BK-5 OR
Performance Lists
5.
Use the TONE buttons to enter the desired
characters.
6.
Repeat steps (4) and (5) to enter the
remaining characters.
NOTE
You can press the [NUMERIC] button to switch between
upper- and lower-case characters as well as numbers. The
[LWR] button can be used to delete the selected character.
The [UP2] button allows you to insert a character.
7.
Press the [WRITE] button to save your set-
tings, thereby creating a new Performance
memory.
This memory is added at the end of the currently
selected Performance List (see "Loading a Perfor-
mance/'Music Assistant'/'Factory Songs' List" on
p. 48).
NOTE
If you haven't loaded any Performance List since switching
on the BK-5 OR, a new Performance List is created, and
your Performance memory becomes its first entry.

Other Performance List functions

1.
Connect a USB memory with at least one
Performance List to the BK-5 OR.
2.
Press the PERFORMANCE [LIST] button.
The display now shows all Performance Lists on the
connected USB memory.
3.
Rotate the dial to select the desired Perfor-
mance List.
50
4.
Press the [MENU] button.
The display now changes to a page with the follow-
ing options:
Function
Explanation
Rename*
Allows you to rename the selected Perfor-
mance List.
Delete*
Deletes the selected Performance List.
Make New
Allows you to create a new (empty) Per-
formance List.
[*] Not available if you selected the "Music Assistant" or "Factory
Songs" list in step (3) above.
5.
Rotate the dial to select the desired option,
then press the [ENTER/SELECT].

If you select 'Rename'

The display changes to:
This page allows you to change the name of the
selected Performance List.
1.
Rotate the [CURSOR÷VALUE] dial to select
the desired character position.
You can press the [NUMERIC] button to switch
between upper- and lower-case characters as well as
numbers. The [LWR] button can be used to delete the
selected character. The [UP2] button allows you to
insert a character.
2.
Use the TONE buttons to enter the desired
characters.

Advertisement

Table of Contents
loading

Table of Contents