Table of Contents
Advertisement
Backing Keyboard BK-5 OR
Panel description
c
PART LWR and UP2 buttons
These buttons are used to switch the real-time parts
(Lower and Upper2) on and off.
NOTE
The Upper1 part (UP1) is always active and cannot be
switched off.
d
ONE TOUCH button
This button is used to enable the recall of One Touch
memories. Pressing and holding it calls up a display
page where you can edit and save One Touch memo-
ries.
NOTE
Use the TONE buttons [1]~[4] to select or deselect a One
Touch memory (see p. 33).
e
MELODY INTELL button
This buttons is used to add an automatic counter-
melody (second or third voice) to your solos or melo-
dies. Pressing and holding it calls up a display page
where you can view the "Melody Intelligent" parame-
ter.
f
NUMERIC button
Press this button if you want to use the TONE buttons
g to enter numeric values (see p. 26).
g
TONE buttons (Tone selection)/[0]~[9] (numeric but-
tons)
These buttons allow you to select Tones by category
(page 25).
You can also use them to input numeric values. To do
so, first activate the NUMERIC button f.
Pressing and holding any of these buttons locks the
Tone (page 57).
14
Advertisement
Table of Contents
