D-Link AC1750 User Manual page 75

Section 3 - Configuration
Enable DHCP-PD:
Check to enable DHCP-PD.
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-Local
Displays the Router's LAN Link-Local Address.
Address:
Enable Automatic IPv6
Check to enable the IPv6 Autoconfiguration.
address assignment:
Enable Automatic DHCP- Check to enable delegation of previxes for router addresses.
PD in LAN:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Autoconfiguration Type:
Stateless DHCPv6.
IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Router Advertisement Enter the Router Advertisement Lifetime (in minutes).
Lifetime:
Click Save Settings.
D-Link DIR-868L User Manual 70