Pppoe - D-Link AC1750 User Manual

Section 3 - Configuration
Select PPPoE from the drop-down menu.
My IPv6 Connection is:
PPPoE Internet Connection Enter the PPPoE account settings supplied by your Internet
Type:
provider (ISP).
PPPoE Session: Select Create a new session if you have IPv6.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP.
IP Address: Enter the IP address (Static PPPoE only).
User Name:
Enter your PPPoE username.
Password:
Enter your PPPoE password and then retype the password in the
next box.
Service Name: Enter the ISP Service Name (optional).
Reconnect Mode: Select either Always-on, On-Demand, or Manual.
Maximum Idle Time: Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
IPv6 DNS Settings: Select either Obtain IPv6 DNS servers automatically or Use the
following IPv6 DNS Servers
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Servers:
D-Link DIR-868L User Manual

PPPoE

69