L2Tp - D-Link AC1750 User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
My Internet Select L2TP (Username/Password) from the drop-down menu.
Connection is:
Address Mode:
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP.
L2TP IP Address:
Enter the L2TP IP address supplied by your ISP (Static only).
L2TP Subnet
Enter the Subnet Mask supplied by your ISP (Static only).
Mask:
L2TP Gateway IP
Enter the Gateway IP Address provided by your ISP.
Address:
L2TP Server IP
Enter the Server IP provided by your ISP (optional).
Address:
Username: Enter your L2TP username.
Password: Enter your L2TP password and then retype the password in
the next box.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle
Enter a maximum idle time during which the Internet
Time:
connection is maintained during inactivity. To disable this feature,
enable Auto-reconnect.
D-Link DIR-868L User Manual
Internet Setup

L2TP

33