Static (Assigned By Isp) - D-Link AC1750 User Manual

Section 3 - Configuration
Select Static IP if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway
address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four
octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
My Internet Connection: Select Static IP to manually enter the IP settings supplied by
your ISP.
IP Address: Enter the IP address assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
Default Gateway: Enter the Gateway assigned by your ISP.
DNS Servers:
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
MTU:
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP. 1500 is the default
MTU.
MAC Address:
The default MAC Address is set to the Internet port's physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC
Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-868L User Manual
Manual Internet Setup

Static (assigned by ISP)

28