Plu Level Shift (For Direct Plus) - Sharp ER-A770 Instruction Manual

PLU level shift (for direct PLUs)

This shift can add to the number of direct PLUs on your POS terminal without adding additional direct PLU
keys. You can use direct PLUs in ten levels by utilizing the PLU level shift keys
Level key shifts the PLU level from the other nine to the required level. (The normal level is the level 1.)
You must program your machine in the PGM mode to select one of the two PLU level shift modes —
automatic return mode* or lock shift mode** — and decide whether to allow PLU level shift in both the REG
and MGR modes or in the MGR mode only.
* The automatic return mode automatically shifts the PLU level back to the level programmed after
pressing a direct PLU key or finalizing each transaction.
** The lock shift mode holds the current PLU level until a PLU level shift key is pressed.
Automatic return mode (for PLU levels)
If your terminal has been programmed for PLU level in the automatic return mode, press a desired PLU
level shift key before a numeric entry.
(Returning every item entry)
LEVEL
1
LEVEL
10
(Returning every transaction)
LEVEL
1
LEVEL
10
NOTE
When you use the FF method, you need not press the
Lock shift mode (for PLU levels)
If your terminal has been programmed for PLU level in the lock shift mode, press a desired PLU level shift key
before a numeric entry.
LEVEL
1
LEVEL
10
NOTE
• When you use the FF method, you need not press the
26
Numeric entry
Direct PLU
(Q'ty, @ )
FOR
Numeric entry
Direct PLU
@
(Q'ty, )
FOR
@
Numeric entry
Direct PLU
(Q'ty, @ )
FOR
(Finalization)
key on numeric entry.
FOR
Stay in the current level
key for multiplication entries.
@
FOR
thru .
LEVEL LEVEL
1 10
Level programmed