3
Selecting an Operating Mode
The POS terminal will display the following listing by pressing the
Mode selection window
Operating Modes
You can select any mode other than REG from the list in the mode selection window. Your POS terminal
supports the following 11 operating modes:
This mode allows you to enter various sales information. The mode selection window
REG mode
does not list this mode. To select this mode from the mode selection window, press
the
This mode allows servers to take X or Z reports on their sales information. It can also
OPXZ mode
be used for the employee time function and GLU table assignments.
This mode temporarily locks all operations of the POS terminal. When you select this
OFF mode
mode, the backlight of the LCD is turned off. Pressing any key turns the POS terminal
on or prompts for a secret code if it has been preset.
X1 mode
This mode is used to take various daily reading reports (X1 reports).
Z1 mode
This mode is used to take various daily resetting reports (Z1 reports).
This mode is used to take various weekly or monthly reading reports (X2 reports).
X2 mode
Z2 mode
This mode is used to take various weekly or monthly resetting reports (Z2 reports).
UNIT PRICE mode
This mode allows you to program unit price of PLUs.
This mode allows you to program those items which need to be changed often such
PGM1 mode
as unit prices and discount percentages.
This mode allows you to program those items which can be programmed in the PGM1
PGM2 mode
mode and do not require frequent changes such as date, time, and terminal functions.
AUTO KEY mode
This mode allows you to program automatic sequencing keys.
key.
CANCEL
key.
MODE
15