Installing An Optional Serveraid Adapter Memory Module; Installing The Dvd Drive Cable - IBM System x3550 M4 Installation And User Manual

If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 101.

Installing an optional ServeRAID adapter memory module

To install an optional ServeRAID adapter memory module, complete the following
steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices and disconnect the power cords.
3. Remove the cover (see "Removing the cover" on page 50).
4. Align the memory module with the connector on the ServeRAID adapter and
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 101.

Installing the DVD drive cable

To install the DVD drive cable, complete the following steps:
Note: When you restart the server, you are prompted to import the existing
RAID configuration to the new ServeRAID adapter.
on page 38.
push it into the connector until it is firmly seated.
Chapter 2. Installing optional devices
75