Related Manuals for StarTech.com MMC110MMST
Summary of Contents for StarTech.com MMC110MMST
- Page 1 Managed 10/100 Mbps RJ45 to Multimode ST Fiber Media Converter MMC110MMST Instruction Manual...
-
Page 2: Fcc Compliance Statement
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an en- dorsement of the product(s) to which this manual applies by the third-party company in question. -
Page 3: Table Of Contents
Instruction Manual Instruction Manual Table of Contents Introduction ..............1 Installation ............... 2 Connecting to Power ..............2 Configuration and Management........3 Web Browser Configuration .............3 Logging Out Of The Monitoring System ........3 System Change Menu .............4 IP Configuration ...............5 MC Status ................6 MC Control ................7 MAC Address Filter ..............9 VLAN Configuration ..............9... -
Page 4: Introduction
Multimode ST Fiber Media Converter. A perfect solution for large, high speed networks that require expansion of fast Ethernet networks over long distances, the MMC110MMST acts as a standalone device allowing for one-channel media conversion between 10/100 Base-TX and 100 Base-FX network segments. -
Page 5: Installation
Instruction Manual Installation For optimal performance and safety, ensure that the MMC110MMS is installed in an area that meets the following specifications: • A temperature between 0 to 45° Celsius (32° and 113° Fahrenheit) • Relative Humidity (RH) less than 95% (non condensing) •... -
Page 6: Configuration And Management
Instruction Manual Configuration and Management The MMC110MMST Media Converter can be configured and managed through SNMP, Web browsers, and Telnet, as outlined in the following sections: Web Browser Configuration Logging Into The Monitoring System The MMC110MMS is accessible through a web browser such as Internet Explorer. -
Page 7: System Change Menu
Instruction Manual Main Menu The main menu of the monitoring system is persistently displayed on the left side of the screen after log-in. Options can be selected with the mouse cursor. The sub-menus available from the main menu are: • VLAN Configuration •... -
Page 8: Ip Configuration
Instruction Manual • Device Name : A device name for the MMC110MMS can be set by the user in this field. • New Password : A new password for the monitoring system can be set in this field. Setting a new password in this field requires entering the previous password in the Old Password field. -
Page 9: Mc Status
Instruction Manual • DHCP : Allows the user to set DHCP to “Enable” or “Disable”. If DHCP is enabled the MMC110MMS will set its’ IP address according to a DHCP server. This IP will replace any other IP address that the Media Converter had been using. -
Page 10: Mc Control
Instruction Manual • Media Port Status : Individual status reports for both the 10/100 TX port and 100 FX port in these categories: • Link Status • Receive Count • CRC Count • Drop Count • Collision Count NOTE: The Apply button in each sub-menu page applies changes for that page, but does not save them beyond the current session. - Page 11 Instruction Manual age limit on how much bandwidth is allocated for broadcast traffic passing through the MMC110MMS. If Broadcast Storm Protection is enabled on either or both of the ports, the Broadcast Limit percentage will be applied on the data packets using that port. •...
-
Page 12: Mac Address Filter
Instruction Manual NOTE: The Apply button in each sub-menu page applies changes for that page, but does not save them beyond the current session. For any changes made, the user must select “Save” from the main menu. MAC Address Filter The MAC Address Filter sub-menu contains fields for each of the two ports on the MMC110MMS that allows the user to enable MAC address filtering for specific addresses. -
Page 13: Snmp Configuration
Instruction Manual to a VLAN group. Users can choose TX Port, FX Port, or Mgmt Port. If Mgmt Port is selected, one of TX Port or FX Port must also be selected. • Untag : Allows the user to enable tagged or untagged VLAN for that VLAN group. - Page 14 Instruction Manual The default get community string for the media converter is public. • Set Community : Allows the user to set the setcommunity string. If the SNMP Network management station only knows the set community string, it can read and write to the MIBs. The default set community string for the media converter is public.
-
Page 15: Telnet Management
Instruction Manual NOTE: The Apply button in each sub-menu page applies changes for that page, but does not save them beyond the current session. For any changes made, the user must select “Save” from the main menu. Save The Save sub-menu allows the user to confirm any changes that have been made in the monitoring system. - Page 16 Instruction Manual mc-status(ms)..Get central MC status mc-config(mc)..Get central MC configuration netconf(nc)..Get networking configuration sysinfo(si)..Get system information • Set Command - Usage: set(s) <OPTION> mc-mode(mm)..Set central MC operation mode port-mode(pm)..Set central MC port mode port-rate(pr)..Set central MC port rate netconf(nc)..Set networking configuration sysadmin(sa)..Set system administrator...
-
Page 17: Specifications
Instruction Manual Specifications IEEE802.3 10Base-T Applicable Standards IEEE802.3u 100Base-TX/100Base-FX 1-port 10/100Base-TX with RJ-45 connector Ports 1-port 100Base-FX with fiber optic connector 100Base-TX: 200Mbps full duplex 100Mbps half duplex Speed 10Base-T: 20Mbps full duplex 10Mbps half duplex 148,810pps forwarding rate for 100Mbps Performance 14,880pps forwarding rate for 10Mbps Port LED... -
Page 18: Led Status Indicators
Instruction Manual LED Status Indicators State Indication Steady (Green) Power On 1. PW/FA Power Off Steady (Orange) Booting or failed Steady Valid connection Flashing 2. LK/AT Transmitting/receiving No connection Steady Full duplex mode 3. FD/CL Flashing Collision occurred Half duplex mode... -
Page 19: Technical Support
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or... - Page 20 StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Serv-...
Need help?
Do you have a question about the MMC110MMST and is the answer not in the manual?
Questions and answers