Table of Contents
Advertisement
3. Connect the SRC-MAX Sp0
4. Turn on the pulse oximeter or monitor. Refer to the
5. The IR and RED LEDs will alternately flash, turn off,
6. The Green and Amber LED (
7. The four selectable parameters (BPM, light level,
SRC-MAX
SRC-MAX Operation with a Pulse Oximeter or Monitor
Figure 7: DOC-10 Sensor Cable
other end of the DOC-10 cable or applicable OEM cable.
See Figure 8.
Figure 8: SpO
applicable pulse oximeter or monitor operator's manual.
turn on and remain lit once the SRC-MAX is powered up.
Low LED will illuminate for 2 seconds and turn off,
indicating the LEDs are functioning properly.
%SpO
, and percent modulation) will initiate to a default
2
condition (LED will be lit closest to the selector button).
sensor/cable connector to
2
sensor/cable connector
2
) and the Red Battery
13
Hide quick links:
Advertisement
Table of Contents
