Horizon Fitness PSE7 User Manual page 8

A S SE MB LY S T E P 2
BOLT (B)
SPRING WASHER (C)
FLAT WASHER (D)
A) Open HARDWARE BAG FOR STEP 2.
B) Slide CONSOLE MAST BOOT onto the bottom of the CONSOLE MAST.
C) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the CONSOLE
MAST.
D) Attach the CONSOLE MAST to the MAIN FRAME using 6 BOLTS (B), 6 SPRING WASHERS (C) and 6 FLAT
WASHERS (D).
HARDWARE BAG FOR STEP 2 CONTENTS :

CONSOLE WIRES
MAIN FRAME
BOLT (B) SPRING WASHER (C)
15 mm 15.4 mm
Qty: 6 Qty: 6
CONSOLE MAST
CONSOLE MAST BOOT
FLAT WASHER (D)
18 mm
Qty: 6