Kodak i5000 series User Manual page 45

Changing print
positions
A-61670 December 2010
The horizontal print position must be changed manually.
1. Remove the output tray.
2. Open the printer access cover.
NOTES:
• The horizontal print positions are visible by a small detent on the printer
rail.
• Printing automatically stops approximately 1.27 cm (½-inch) from the
trailing edge of the document, even if the information has not been
completely printed.
3. Slide the printer carrier to the desired position, so that is aligned with the
slot on the printer carrier with the desired horizontal print position and slide
the printer carrier in place.
NOTE: The print location indicators at the edge of the input elevator can
be used as a guide to verify your horizontal print position.
4. Close the printer access cover and reinstall the output tray.
4-5