Document Printing - Kodak i5000 series User Manual

4 Document Printing

Contents
A-61670 December 2010
Printer specifications .................................................................................. 4-2
Installing/Replacing the ink cartridge ......................................................... 4-3
Changing print positions ............................................................................ 4-5
Installing/Replacing the ink blotter strips.................................................... 4-6
Problem solving ......................................................................................... 4-8
This chapter provides information for using the optional Kodak Enhanced
Printer Accessory. In order to use the printing option you must have purchased
and installed the Kodak Enhanced Printer Accessory.
NOTE: See the instructions that came with the Enhanced Printer Accessory
for procedures on how to install this accessory.
Refer to the Scanning Setup Guide for the TWAIN Datasource or ISIS Driver
on the CD or your scanning application documentation for more information
about enabling printing and setting up print strings.
The Enhanced Printer operates at full scanner speed. The printer can add a
date, time, document sequential counter and custom messages.
The print string can be configured to include information that stays the same
for each document; such as batch name or operator and information that may
change for each page scanned; i.e., the document sequential counter.
All printer controls and functions are accessible through the TWAIN
Datasource or ISIS Driver.
NOTES:
• Printing must be enabled and an ink cartridge must be installed before
starting a scan session.
• Clean the scanner's paper path components daily when using the printer.
• You cannot print on documents that are smaller than 10 cm (4 in.) in length.
• If you attempt to scan with a job setup that has Printing enabled, and you do
not have an Enhanced Printer installed, an error will be displayed.
4-1