Document Printing; Using The Kodak Printer Accessory - Kodak S2000f Series User Manual

4 Document Printing

Using the Kodak
Printer Accessory
A-61916 August 2019
This chapter provides information for using the Kodak Printer Accessory for
the S2000f/S3000 Series Scanners. In order to use the printing option you
must have purchased and installed the Kodak Printer Accessory.
NOTE: See the instructions that came with the Printer Accessory for
procedures on how to install this accessory.
Refer to the Scanning Setup Guide for the TWAIN Datasource or ISIS Driver
on the CD or your scanning application documentation for more information
about enabling printing and setting up print strings.
The Printer Accessory operates at full scanner speed. The printer can add a
date, time, document sequential counter and custom messages.
The print string can be configured to include information that stays the same
for each document; such as batch name or operator and information that may
change for each page scanned; e.g., the document sequential counter.
All printer controls and functions are accessible through the TWAIN
Datasource or ISIS Driver.
NOTES:
• Printing must be enabled and an ink cartridge must be installed before
starting a scan session.
• Clean the scanner's paper path components daily when using the printer.
• If you attempt to scan with a job setup that has Printing enabled, and you do
not have a printer installed, an error message will be displayed on the
scanner screen.
• You cannot use document printing if you are using the rear document exit.
43