Horizon Fitness E401 User Manual page 4

CONSOLE
GRIP PULSE
WATER BOTTLE HOLDER
TOP COVER
PEDAL ARM
WHEEL COVER
TOOLS INCLUDED
5mm Allen Wrench
c
6mm Allen Wrench
c
Phillips Screw Driver
c
13/15mm Flat Wrench
c
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com

E401_Rev.1.5.indd 6-7
PARTS INCLUDED
1 Console 2 Handlebar Cover Sets
c c
1 Console Mast 2 Top Covers
c c
1 Front Stabilizer Tube 1 HORIZON FITNESS
c c
2 Upper Handlebars 12-Volt Power Adapter
c
2 Lower Handlebars 1 Water Bottle Holder
c c
2 Lower Link / Pivoting Foot Pads 4 Hardware Bags
c c
ASSEMBLY STEP 1
UPPER HANDLEBAR
HANDLEBAR COVER
CONSOLE MAST
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
PIVOTING FOOT PAD
A Open HARDWARE BAG FOR STEP 1.
B Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B)
and 2 FLAT WASHERS (C).
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A)
MAIN FRAME
SPRING WASHER (B)
FLAT WASHER (C)
FRONT STABILIZER TUBE
SPRING WASHER (B)
BOLT (A) FLAT WASHER (C)
20 mm 18 mm 20 mm
Qty: 2 Qty: 2 Qty: 2

2/29/08 10:05:29 AM