HP Pavilion g7 Maintenance And Service Manual page 81

5. Remove the service door (see
6. Remove the optical drive (see
7. Remove the hard drive (see
8. Remove the keyboard (see
9. Remove the top cover (see
10. Remove the system board (see
11. Remove the heat sink (see
Remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2. Lift the processor (2) straight up, and remove it.
NOTE: The gold triangle on the processor (3) must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Service door on page
Optical drive on page
Hard drive on page 36).
Keyboard on page 43).
Top cover on page 46).
System board on page
Fan and heat sink on page
32).
33).
65).
68).
Component replacement procedures 73