HP Pavilion g7 Maintenance And Service Manual page 64

2. Release the wireless antenna cables (2) from the clips and the opening in the base enclosure.
NOTE:
antenna cables.
CAUTION:
support the display assembly can result in damage to the display and other
computer components.
3. Remove the four Phillips M2.5 × 6.5 screws (1) that secure the display assembly to
the computer.
4. Remove the display assembly by lifting straight up (2).
56 Chapter 4 Removal and replacement procedures
It may be necessary to release the USB board ZIF cable to remove the wireless
Support the display assembly when removing the following screws. Failure to