Processor - HP Pavilion g7 Maintenance And Service Manual

2. Remove the PCH heat sink by lifting straight up (2).
NOTE:
system board components, it may be necessary to move the heat sink from side to side to
detach it.
NOTE:
and the system board components each time the heat sink is removed. Replacement
thermal material is included with the base enclosure, heat sink, processor, and system board
spare part kits.
Reverse this procedure to install the PCH heat sink.

Processor

NOTE: The processor spare part kit includes replacement thermal material.
Description
AMD A10-4600M processor (3.2 GHz/2.3 GHz, 1600 MHz/4.0 MB L2 cache, DDR3, quad core,
35W)
AMD A8-4500M processor (2.8 GHz/1.9 GHz, 1600 MHz/4.0 MB L2 cache, DDR3, quad core,
35W)
AMD A6-4400M processor (3.2 GHz/2.7 GHz, 1600 MHz/1.0 MB L2 cache, DDR3, dual core, 35W)
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
72 Chapter 4 Removal and replacement procedures
Due to the adhesive quality of the thermal material located between the heat sink and
The thermal material must be thoroughly cleaned from the surfaces of the heat sink
Battery on page 31).
Spare part number
683046-001
683048-001
683047-001