HP Compaq 8100 Elite Hardware Reference Manual page 44

5. Slide the hard drive back to disconnect it from the carrier then lift it up and out of the carrier.
NOTE:
Figure 41
6. Place the new hard drive in the carrier then slide the hard drive back so that it seats in the SATA
connector on the carrier's circuit board. Be sure the connector on the hard drive is pressed all the
way into the connector on the carrier's circuit board.
NOTE:
Figure 42
38 Hardware Upgrades
Your computer may look different than the illustration shown below.
Removing the Hard Drive
Your computer may look different than the illustration shown below.
Replacing the Hard Drive
ENWW