Factory Default Settings; Technical Specifications - NETGEAR WN3000RP User Manual

Factory Default Settings

The following table includes the factory settings for the extender. You can use the Factory
Reset button or the Erase feature to return the extender to these settings. (See
Extender to Its Factory Settings
Table 4. Factory Settings
Feature
Setup Wizard
Wireless communication
Wireless network names (SSID)s
Security
Transmission speed
Country/region
Operating mode
Data rate
DHCP
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.

Technical Specifications

The following table includes the product specifications.
Table 5. Technical specifications
Extender Specifications
Network protocol and standards
compatibility
Power consumption
Physical specifications
N300 WiFi Range Extender
on page 25.)
Setting
Enabled
Enabled
NETGEAR_EXT
Disabled
1
Auto
Varies by region
802.11n, 802.11g, 802.11b
Up to 300 Mbps
Client enabled
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
100-240V ~0.1 A, 50-60 Hz
• Dimensions: 67 x 55 x 34 mm (2.64 x 2.17 x 1.34 in.)
• Weight: 98 g (3.46 oz)
Supplemental Information
35
Return the