Add A Wps Client To The Extender Network; View Or Change Wireless Settings - NETGEAR WN3000RP User Manual

Add a WPS Client to the Extender Network

A WPS client is a computer or wireless device. WPS lets you add a wireless computer or
device to the extender's WiFi network without typing the WiFi password. WPS does not
support WEP network security. If you are using WEP security, see
genie Smart Setup
Note: For instructions about how to use the physical WPS button on the
extender, see

To add a WPS client:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. In the address field of your browser, enter http://www.mywifiext.net.
A login screen displays.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Add WPS Client.
5. Click the Next button.
6. Select a setup method:
• Push button. Click the WPS button on this screen.
• PIN Number. The screen adjusts. Enter the client security PIN, and click the Next
button.
7. Within two minutes, go to the client device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up your wireless computer with the network
password when it connects. The extender WPS screen displays a confirmation message.

View or Change Wireless Settings

Changing the wireless setting disconnects all computers or wireless devices from the WiFi
network. To reconnect to the WiFi network, you must use the new settings.

To view or change the wireless settings:
1. On your computer, launch a web browser.
2. In the address field of your browser, enter http://www.mywifiext.net.
N300 WiFi Range Extender
on page 10.
Connect with WPS
Manage the Extender Network and Settings
on page 9.
18
Connect with NETGEAR