Back Up The Extender Configuration; Restore Saved Configuration Settings - NETGEAR WN3000RP User Manual

Back Up the Extender Configuration

When the extender works correctly after initial setup, NETGEAR recommends that you back
up the extender configuration settings. After you have backed up the settings, if you change
the extender settings but are not content with the new settings, you can restore the
backed-up configuration settings.

To back up the extender configuration settings:
1. On your computer, launch a web browser.
2. In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Maintenance > Backup Settings.
5. Click the Backup button.
Your browser extracts the configuration file from the extender.
6. If you do not have your browser set up to save downloaded files automatically, locate where
you want to save the file.
A copy of the current settings is saved in the location you specified.

Restore Saved Configuration Settings

You can restore the configuration file of the extender to a previously saved configuration file.

To restore the extender configuration settings:
1. On your computer, launch a web browser.
2. In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser.
N300 WiFi Range Extender
Monitor and Maintain the Extender
24